© 2010 – 2015 Drake Controls. All Rights Reserved.
The ProAct™ P-Series FL Position Controller is a family of electric actuators intended to be mounted on-engine to control varying functions including (but not limited to): fuel rack positioning, timing control, throttle valve, and wastegate positioning. The actuator is effectively a positioner which accepts a position command signal from another device in the system such as a speed control.
It includes an integral digital driver capable of controlling the actuator, communicating with the outside control system, and containing on-board software and intelligence to realize monitoring and customizing functions.
The actuators are designed to be base- or flange-mounted (Model IV is base-mounted only) in an on-engine environment and can therefore withstand high levels of vibration and temperature extremes. They all have a 0.625-36 serrated tooth terminal shaft, and an optional rotation scale and indicator are available for visible travel detection. The actuators accept analog (jumper-selectable 0 to 5 Vdc, 4 to 20 mA, or 0 to 200 mA), CAN, or PWM position command signals and can be configured with a primary and backup position command signal input, providing redundancy with automatic failover and backup logic. It monitors all available internal and external signals, and annunciates any detected faults through a discrete output. An analog output (0 to 5 Vdc or 4 to 20 mA) provides actual position indication, and a discrete input is available to remotely shut down the actuator.
Additionally, the ProAct P-Series FL includes on-line and off-line diagnostics, current limiting based on driver electronics temperature, CAN communications, and service port communications. It is field programmable, allowing a single design to be used in many different applications. It must be configured and calibrated to the specific engine with a personal computer (PC) and a Woodward ProAct Service Tool that communicates serially to the driver via RS-232. The Service Tool (part number 9927-1187) can be downloaded from the Woodward website (www.woodward.com). Data files for subsequent applications of the same engine model can be downloaded off-engine.
Refer to manual 26659 for more detailed information.
Product Specification 03401
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
Additionally, a 503 Service Unavailable error was encountered while trying to use an ErrorDocument to handle the request.